24
25
Press the SET or the START button to per-
manently store the set unit. Afterwards, the
menu image for the display selection of the
percentage values appears (Fig. 3.10).
3.5.3 Selection of percentage values to be
displayed after a measurement
Your
scaleo-comfort
diagnostic scale allows
the percentages for body fat, body water
and muscle mass calculated from the im-
pedance analysis to be displayed after a
measurement. With this menu, it can be
specified how many or whether any of
these percentages should be displayed.
There are the following selection options:
1. Display of all three percentages:
Body fat, body water and muscle mass
(Fig 3.10)
2. Display of body fat and body water
(Fig. 3.11)
3. Display of body fat (no fig.)
4. No display of percentages (no fig.)
Fig. 3.10
Fig. 3.11
The selection is made by repeatedly pressing
the UP/MEM button, whereby the respec-
tively selected combination is indicated by
the display of the corresponding percentage
symbol(s).
By pressing the SET or START button, the
selected combination is stored permanently.
Note:
After a measurement, all percentages are
calculated every time and stored in the meas-
ured value memory, even if no percentages
were selected for display.
3.5.4 Clearing the measured value memory
Note
:
The function for clearing the measured value
memory can be found after the display selec-
tion of the percentage values in the settings
menu sequence. If you would like to select
the function without setting the previous
parameters, keep pressing the SET button in
setting mode until the corresponding menu
image appears.
Fig. 3.12: Don’t clear the measured value
memory
Fig. 3.13: Clear the measured value memory
G
et
tin
g s
ta
rt
ed
3
