28
29
Step 1:
In the menu image for resetting the wireless
connection, the radio symbol on the bot-
tom line is blinking and on the line for the
value display, either the abbreviation “on”
(Fig. 3.14) or “oFF” (Fig. 3.15) is displayed.
If “oFF” appears, this means that no wire-
less connection could be established to
your PC or PDA. If “on” appears, there is
already a wireless allocation and the wire-
less connection to your PC or PDA is estab-
lished.
You can now toggle back and forth between
the two by pressing the UP/MEM button.
If you switch from “oFF” to “on”, this
means that a wireless allocation is to be
set up to your PC or PDA. If you switch
from “on” to “oFF”, you can release the
wireless allocation so that, for example,
a wireless connection can be made to an-
other PC or PDA. Otherwise, the wireless
allocation is maintained.
Step 2:
If you really would like to reset the wireless
connection, select “oFF” by pressing the
UP/MEM button and press SET or START.
Otherwise, press the SET or START button
when “on” appears.
Step 3:
The menu for resetting the wireless con-
nection is the last setting menu for the
common parameters. After confirming the
setting, the word “End” appears to let you
know this (Fig 3.16).
You can now switch the scale to sleep
mode by pressing the START button for at
least 2 seconds.
Fig. 3.16: End of the setting menu
3.6 Personal settings
Before the first measurement, personal
parameters must be stored which are
required for determining the percentage
body fat, body water and muscle. In addi-
tion, the scale has 8 personal basic data
memory places, where the user, e.g. each
family member, can store and call up his
or her data, such as gender, age, height
and approximate activity level. Each user
can be assigned a personal user no. ranging
from 1 to 8. At each later measurement,
the user in question first has to input his
user no. for identification before he begins
with the measurement. The personal set-
tings can be made in the menu-guided set-
ting mode of the scale.
Step 1:
To activate the setting mode, first press
the SET button when the scale is in sleep
mode as described in Section 3.4 – i.e.
when the scale is in its idle state – and
select your personal user no. (from 1 to 8)
with the UP/MEM button after the user no.
0 appears. Afterwards, press the SET or
START button to confirm.
The menu image then appears on the dis-
play for the activation/enabling (Fig. 3.17 /
3.18).
Attention:
If several people would like to use the
scale, make sure that each person is as-
signed a different user no. No two people
should have the same number.
G
et
tin
g s
ta
rt
ed
3
