Appendix C: ChemiDoc XRS
System installation
a. Connect the Motorized zoom lens cable to the 5-pin din connector labeled LENS on the side panel
of the hood. (See picture below)
Motorized Zoom Lens control
cable
Magnified view of the Side Panel
5-Pin Din
connector
labeled LENS
Serial port DB25
to connect a null
modem serial
cable from PC
Com1 port. This
option permits to
b. Connect the camera power cable to the connector on the camera labeled POWER (See picture
below)
Camera Power Supply
Connector on the cable
Power connector on the camera
c. Connect one end of the Camera Controller cable to the connector on the camera labeled DATA and
the other end of this cable should be connected to the PCI Digitizing Card after the card is installed
in the PC per procedure in
Step 4.2.3.
Camera Controller Cable and Connector
Controller Cable Connector labeled Data
Page 38 of 42
