Place the Light Seal in the round slot on the
bottom side of the bracket
Make sure that the hard side of the donut is facing
outward
7. Place the bracket assembly on a hard surface and attach the Camera with the wide-angle lens
with the black washer and the thumbscrew. Before tightening the screw make sure that the
wide-angle lens is sitting into the round slot it he Light Seal. Push camera down so that the
lens goes into the slot all the way and comes to a stop. See pictures below:
Attach camera to the bracket using the black
thumbscrew and washer
Make sure that the lens is seated properly in
round slot in the soft side of the foam
8. Tighten the screw so that the camera is secured properly to the bracket. Now place the
B Camera assembly on the universal hood and secure it with washers and
thumbscrews.
Secure the Camera to the hood using black
thumbscrew and washer
9. Adjust the position of the bracket so that the light seal and lens are well centered in the round
opening in the Universal Hood and tighten the thumbscrews to secure the bracket tightly to
the hood.
10. Turn ON the power to the hood and the camera and click on Live Focus button in the
software.
11. Lens has a Iris and Focus ring that allows users to adjust for optimum light collection and
focus
Page 18 of 42
