BinTec elmeg T444, Operating Instructions Manual

Page: 78 / 102

Installing programs from the CD
System requirements:
·
IBM or 100% com pa ti ble PC.
·
Pen ti um or com pa ra ble pro ces sor, min. 233 MHz clock rate and MMX-tech no lo gy.
·
One of the fol lo wing ope ra ting sys tems has to be in stal led: Wind ows, 2000, ME, XP or Wind ows Vis ta (32
bit).
·
RAM for Wind ows: ME min. 64 MB, 2000, Wind ows XP (32 bit), min. 128 MB, Wind ows Vis ta (32 bit)
min. 512 MB.
·
You also need a VGA gra phics adap ter, ap prox. 65000 co lors, a re so lu ti on of at least 800x600 pi xels.
·
The PC has to have a CD ROM dri ve.
·
The re qui red free disk spa ce for in stal la ti on is 40 MB.
·
The PC should have at least one free USB port.
·
A net work card must be in stal led to per form con fi gu ra ti on via Ether net.
·
To con fi gu re your sys tem via the in ter nal ISDN con nec ti on, you must have an ope ra tio nal ISDN PC card in -
stal led in your PC.
·
In ter net Ex plo rer Ver si on 6.00 or hig her must be in stal led to use the »WEB- LCR«.
Installation instructions:
·
Start up your PC.
·
In sert the CD ROM supp lied with the sys tem in the CD ROM dri ve of your pcs.
·
Wait a mo ment un til the pro gram starts au to ma ti cal ly. If the au to start op ti on is not ac ti vat ed in your PC
you can start the file »se tup. exe« di rect ly from the main di rec to ry of the CD using Wind ows Ex plo rer (dou -
ble click on the file), or using the op ti on »Run« in the Windows start menu.
When the file is started the welcome screen of the CD is displayed.
Dri vers
68