Binder MKF 115 Operating Manual Download Page 26

Page: 26 / 115

MKF+ MKFT (E3.2) 07/2017

page 26/115

4.2.3 Water circle: lever for condensate recycling (option)

Figure 9: Lever for condensate recycling (open position)

next to the freshwater can behind the maintenance access door

The lever (19) for condensate recycling is located behind the maintenance access door next to the fresh-
water can.

•

Open lever (vertical position): the condensate from the interior is conducted to the freshwater can. Use

only with clean interior!

•

Closed lever (horizontal position): the condensate is conducted to the wastewater connection. Use this

position in case of soiling / contamination of the interior.

CAUTION

Soiling of the vapor humidification system.

Damage to the chamber.



Conduct the condensate to the wastewater connection in case of soiling / contamina-

tion of the interior (horizontal lever position).

(19)

Summary of Contents for MKF 115




















































































































Search results

Summary of Contents for MKF 115

Reviews:

Related manuals for MKF 115

Brands by name

Popular brands

Binder MKF 115, Operating Manual

Search results

Summary of Contents for MKF 115

Reviews:

Related manuals for MKF 115

Brands by name

Popular brands