Binder APT.line M Series, Operating Manual

Page: 28 / 61

M 01/2009 page 28/61
9.1 Overview menu-based program entry
Screens showing the initial normal display in Idle Mode
W X
08:43:55 15.12.05
CONFIG VIEW-> PGM
TEMP
25.0
26.8
°C
HAND
W X
08:43:55 15.12.05
CONFIG VIEW->
PGM
FAN SPEED
50
%
HAND
Hit button PGM. The window
program selection
appears
Select a program via the arrow keys and confirm by ENTER
The following screen serves to select a
subroutine
:
08:43:57 15.12.05
Prog. Select.
Prog 1 PROG 01
Prog 2 PROG 02
Prog 3 PROG 03
Prog 4 PROG 04
Prog 5 PROG 05
Prog 6 PROG 06
Prog 7 PROG 07
Prog 8 PROG 08
Prog 9 PROG 09
Prog 10 PROG 10
Prog 11 PROG 11
Prog 1 PROG 01
TP- Program 2
TP- Program 3
TP- Program 1
Select the first subroutine “
TP-Program 1
” (TP-Program 2 und TP-Program 3 are without function) and
confirm with ENTER.
An initially empty
program table
appears. You can now enter the temperature program.
Program No. Subprogram TP-Program No. 1
08:43:55 15.12.05
Temperature at the beginning
of the program section
Fan speed in %
Factory setting:
50% in Idle Mode
100 % in Manual Mode and
Program Mode
Operation line 1
(air flap)
Total number of program
sections
Parameter set (preselected)
Tolerance band limits tem-
perature (maximum and mini-
mum temperature)
Duration of program
section Number of start section in case
of repeat cycles Number of repeats in case of
repeat cycles
You can enter
Program sections
into this program table.
DEL
08:43:55 15.12.05
Prog select Fr. Abs. 372
Prog 1 PROG 01 ?
Prog 2 PROG 02 ?
Prog 3 PROG 03 ?
Prog 4 PROG 04 ?
Prog 5 PROG 05 ?
Prog 6 PROG 06 ?
Prog 7 PROG 07 ?
Prog 8 PROG 08 ?
Prog 9 PROG 09 ?
Prog10 PROG 10 ?
Prog11 PROG 11 ?
Prog12 PROG 12 ?
Prog13 PROG 13 ?
Prog14 PROG 14 ?
Prog15 PROG 15 ?
Prog16 PROG 16 ?
Prog17 PROG 17 ?
Prog18 PROG 18 ?
Prog19 PROG 19 ?
P 20 PROG 20 ?