Binder APT.line M Series, Operating Manual

Page: 23 / 61

M 01/2009 page 23/61
7. Graphical representation of the measurement course (chart
recorder function)
This way of data representation imitates a chart recorder and allows recalling any set of measured data
of any point of time out of the recorded period.
Normal display of the chart recorder function:
Top left: The actual date and time are displayed.
Below: The current temperature value [ °C] is numeri-
cally and graphically displayed.
Scaling of temperature: 0 °C to 300 °C.
The open air flap is displayed on the right side as an
enlarged line.
Button allows toggling between different rep-
resentations.
Depending on the selected kind of representation,
button
H
might not have been visible until now.
History screen with cursor:
Select button
H
= History. A pink line appears
on the screen marking as a cursor the selected in-
stant. You can recall the recorded data of a certain
instant.
Top left: Date and time of the selected cursor position
are displayed.
Below: The corresponding temperature value of this
instant is numerically and graphically displayed.
Scroll the cursor position using the arrow buttons.
Single arrow buttons: fine-tuning.
Double arrow buttons: page-up and page-down.
Switch to the zoom screen by pressing button
:
History - zoom function:
Magnifier buttons
: Zoom and zoom
back (i.e., shorten or extend the displayed period).
Toggle back to the former representation screen using
button
.
11:32:20 15.12.05
10:45:00
+23.9 °C
11:05.00
11:32:37 15.12.05
11:32:14 15.12.05
10:45:00
+23.9 °C
CONFIG VIEW->
H
11:05:00