27
7.4.4 Deregister a Handset
This operation should only be necessary if one of your handsets becomes
faulty or lost and needs to be replaced.
A de-registered handset will have
REGISTER YOUR HANDSET
on the
display.
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select
ADv SETTING
and then press <MENU/OK>.
3. Press <UP/DOWN> to select
DEREGISTER
and then press <MENU/OK>.
4. Modify the displayed
PIN
, if necessary, using <DEL/INT> to delete digits
and the keypad to enter new ones, then press <MENU/OK> to confirm.
5. Press <UP/DOWN> to select the handset number you want to remove, and
then press <MENU/OK> to confirm, and a confirmation beep will sound.
7.4.5 Change the system PIN code
The System
PIN
is used for registration / de-registration of handsets, setting
some functions and for accessing the answering machine remotely. The
default System
PIN
code is 0000. The maximum length of the System
PIN
is 8 digits.
NOTE:
If you forget your
PIN
code, you can reset it to its default 0000 using
a handset Reset (see 7.8).
1. Press <MENU/OK> to enter the Main Menu list.
2. Press <UP/DOWN> to select
ADv SETTING
and then press <MENU/
OK> to select.
3. Press <UP/DOWN> to select
PIN
and then press <MENU/OK> to show
OLD CODE.
4. Enter the current System
PIN
(default 0000) and then press <MENU/
OK> to show
NEW CODE.
5. Enter your new system
PIN
(minimum 4 digits, maximum 8 digits), and
then press <MENU/OK> to show
CONFIRM CODE.
6. Enter your new system
PIN
again and press <MENU/OK> to confirm it.
A confirmation beep is played.
7.5 Block list setting
The Block List allows you to program up to 30 phone numbers that you want to
block, and for which the phone will not ring nor accept at the answering machine.
CALL BLOCKED
is displayed on the handset and in the Call Log, when a
call is received from a programmed number.
NOTE:
This function is only applicable if you subscribe to the Caller Display
service on your phone line. The call will be blocked if the incoming Caller
Display number matches one stored in the Block List.