12
4 USING YOUR PHONE
4.1 Make a call
4.1.1 Pre-dialling
Enter the phone number (maximum 20 digits) and then press <TALK> to
connect to the line and dial the number. When entering the number, if you
make a mistake, press <DEL/INT> to delete digits.
4.1.2 Direct dialling
Press <TALK> to connect to the line and then dial the number.
(
NOTE:
if you enter a wrong digit you cannot correct it with the <DEL/INT> key.)
4.1.3 Call from the redial list
Press <REDIAL> key in idle mode.
Press <UP/DOWN> to select the desired entry in the redial list and then
press <TALK>
to dial out the selected redial number.
4.1.4 Call from the call log
Press <CALLS/UP> in idle mode.
Press <UP/DOWN> to select the desired entry in the call log and then press
<TALK>
to dial out the selected call log number.
NOTE:
You need to subscribe to Caller Line Identification service to be able
to see the caller’s number or name in the call log.
4.1.5 Call from the phonebook
Press <PHONEBOOK> key in idle mode.
Press <UP/DOWN> to select the desired entry in the phonebook and then
press
<TALK>
to dial out the selected phonebook number.
4.2 Answer and end a call
1. When the phone rings, press <TALK>.
2. To end a conversation, press <OFF>.
Warning
: When the handset is ringing, please do not hold it too close to
your ear as the volume of the ringing tone may damage your hearing.
IMPORTANT NOTE:
If AUTO ANSWER is set to ON, then lifting the handset
off the base or a charger will answer the call automatically, without pressing
any buttons.
Also, if AUTO HANG-UP is set to ON, then replacing the handset on the
base or a charger will end the call automatically, without pressing any
buttons.
