26
7.4.2 Set the base ringer volume
You can set the telephone base ringer volume from level 1 to level 5 or turn
off the ringer
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select
BASE TONES
.
3. Press <MENU/OK> to show
BASE vOLUME
and then press
<MENU/OK> again.
4. Press <UP/DOWN> to select the desired setting from
OFF
or
LEvEL
1-5 (each level will play as it is selected) and then press <MENU/OK> to
confirm your chosen volume.
7.4.3 Register a Handset
IMPORTANT: When you purchase your phone system, all handsets are
already registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if a
handset has become faulty.
You can register additional handsets to have up to five handset per base
unit, with each handset’s number (1 to 5) shown on its display.
(
NOTE:
Each handset can only be registered to one base.)
To add or re-register a handset:
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select
ADv SETTING
and then press <MENU/OK>.
3. Press <UP/DOWN> to select
REGISTER
and then press <MENU/OK>.
4. Modify the displayed
PIN
, if necessary, using <DEL/INT> to delete digits
and the keypad to enter new ones, then press <MENU/OK> to confirm,
and the display will show
WAITING
with
SEARCHING
flashing.
5. Press and hold the <PAGE/FIND> button on the telephone base for 5
seconds until a beep sounds on the base.
6. After a short time, a beep will sound on the handset if the registration
is successful, and the display will show the registered handset number.
NOTE:
An error tone will sound if the registration is not successful, and
REGISTRATION FAILED
will display for a few seconds.
