55
•
The engine stop switch is in “RUN” position.
•
Oil pressure light is on.
If the oil pressure light keep on lighting, stop the engine immediately and check the engine oil level.
NOTE
: running the engine with insufficient oil pressure could damage the engine seriously.
Starting procedure
This motorcycle is equipped with electronic fuel injection system.
•
Push the “START” button with the throttle completely close
The engine does not start with the throttle full open because the electronic control of the engine cuts
the fuel injection.
•
If the temperature is low (under about 15°C (about 59°F)) turn the starter device (
page 45
) to make a
richer fuelling. After the engine has completed the warm up, turn back the starter device to the original
position.
When the engine is hard to start (flooded)
If the engine is hard to start, it could be flooded.
1. Put the starter switch in “RUN” position.
2. Open the throttle completely.
3. Push the starter button for 5 seconds.
4. Start the engine as normal procedure.
If the engine starts with an irregular idling, open the throttle approximately 1/8 turn.
If the engine does not start, repeat the procedure above.
Summary of Contents for DB5 Mille
Page 1: ...Owner s manual ...
Page 94: ......
Page 95: ...BIMOTA S p A via Giaccaglia 38 47900 Rimini ITALY ...
