74
reached. Turn the screws counterclockwise to pull
the chain up, turn the screws clockwise to loosen
the chain slack. Move the motorcycle forward and
check the slack again. The correct slack is 25-35
mm.
4. Align the ending shoes of the swingarm (
3
) with
the reference signs on the swingarm plates (
4
)
on both sides of the swingarm. The two shoes of
the swingarm has to be placed with the
corresponding signs on the plates. If the axle
alignment is not correct, turn the screws till the
corresponding signs are matching left and right.
5. Tighten the rear axle rod at the torque of
100
Nm
. If you have not a torque wrench, contact
immediately your
Bimota
dealer to verify the
installation is made in the proper way.
6. Check the drive chain slack again.
(3)
(4)
Summary of Contents for DB5 Mille
Page 1: ...Owner s manual ...
Page 94: ......
Page 95: ...BIMOTA S p A via Giaccaglia 38 47900 Rimini ITALY ...
