Billion BiPAC 6300VNOZ User Manual Download Page 107

Page: 107 / 120

101

4.4.4.9 SAMBA & FTP Server

Samba and FTP are served as network sharing.

SAMBA Server:

Activated to enable SAMBA sharing.

Work Group:

The same mechanism like in Microsoft work group, please set the Work Group name.

NetBIOS Name:

The sharing NetBIOS name.

FTP Server:

Activated to enable FTP sharing.

FTP Server Port:

Set the working port. Well-known one is 21. User can change it.

SAMBA/FTP login account:

Default user:

admin/admin, it is the administrative user and a super user, it has the full authority of SAMBA

/FTP access and operation permission of objects in SAMBA and FTP server.

New user:

users can create new user(s) to grant it (them) access and permission to the SAMBA & FTP

server.

Please see

4.4.5.1 User Management.

Summary of Contents for BiPAC 6300VNOZ

























































































































Search results

Summary of Contents for BiPAC 6300VNOZ

Reviews:

Related manuals for BiPAC 6300VNOZ

Brands by name

Popular brands

Billion BiPAC 6300VNOZ, User Manual

Search results

Summary of Contents for BiPAC 6300VNOZ

Reviews:

Related manuals for BiPAC 6300VNOZ

Brands by name

Popular brands