Billion BiPAC 6300VNOZ, User Manual

Page: 101 / 120

95
Source Port Number:
The source port number of packets to be monitored. 0 means “Don’t care”.
Destination IP Address:
The destination IP address of packets to be monitored. 0.0.0.0 means “Don’t care”.
Destination Subnet Mask:
Enter the subnet mask of the destination network.
Destination Port Number:
This is the Port that defines the application. (E.g. HTTP port 80.)
DSCP:
DSCP: Differentiated Services Code Point, it is recommended that this option be configured by an
advanced user or keep 0. (0 means Don’t care.)
Protocol:
Specify the packet type (TCP, UDP, ICMP, ICMPv6) that the rule applies to.
IP/MAC Filter Listing
#:
Item number
.
Active:
Whether the connection is currently active.
Interface:
show the interface the rule applied to.
Direction:
show the direction the rule applied to.
Source IP(IPv6) Address/Mask(Prefix):
The source IP address or range of packets to be monitored.
Destination IP(IPv6) Address/Mask(Prefix):
This is the destination subnet IP address.
Source MAC Address:
show the MAC address of the rule applied.
Source Port:
The source port number of packets to be monitored.
Destination Port:
This is the Port or Port Ranges that defines the application.
DSCP:
show the set DSCP.
Protocol:
It is the packet protocol type used by the application. Select either
TCP
or
UDP
or
ICMP or ICMPv6