Billion BiPAC 6300VNOZ User Manual Download Page 7

Page: 7 / 120

1.2 Features of the BIPAC 6300VNOZ

• Gigabit Ethernet WAN (GbE WAN) for Fibre (FTTC/ FTTP/ FTTH) high WAN throughput

• Gigabit Ethernet LAN

• IPv6 ready (IPv4/IPv6 dual stack)

• Multiple wireless SSIDs with wireless guest access and client isolation

• IEEE 802.11 b/g/n compliant Wireless Access Point with Wi-Fi Protected Setup (WPS)

• Wi-Fi Protected Access (WPA-PSK/ WPA2-PSK) and Wired Equivalent Privacy (WEP)

• SOHO Firewall Security with DoS Preventing and Packet Filtering

• Quality of Service Control for traffic prioritization management

• Universal Plug and Play (UPnP) Compliance

• Supports IPTV Application

• Make phone calls via Internet

• Voice over IP compliant with SIP standard

• Two FXS ports for connecting to regular telephones

• Call Waiting, Conference Call

• Speed Dial, Return Call, Redial

• Don’t Disturb

• Ease of Use with Quick Installation Wizard

• One USB port for NAS (FTP/ SAMBA server)

• Ideal for SOHO, office and home users

Network Protocols and Features

• IPv4, IPv6 or IPv4/IPv6 Dual Stack

• NAT, Static Routing (v4/ v6) and RIP-1/ 2

• DHCPv4/ v6

• Universal Plug and Play (UPnP) Compliant

• Dynamic Domain Name System (DDNS)

• Virtual Server and DMZ

• SNTP, DNS Proxy

• IGMP Snooping and IGMP Proxy

• MLD Snooping and MLD Proxy

Firewall

• Built-in NAT Firewall

• Stateful Packet Inspection (SPI)

• DoS attack prevention including Land Attack, Ping of Death, etc

• Access Control

• IP&MAC filter, URL Content Filter

• Password protection for system management

• VPN pass-through

Summary of Contents for BiPAC 6300VNOZ

























































































































Search results

Summary of Contents for BiPAC 6300VNOZ

Reviews:

Related manuals for BiPAC 6300VNOZ

Brands by name

Popular brands

Billion BiPAC 6300VNOZ, User Manual

Search results

Summary of Contents for BiPAC 6300VNOZ

Reviews:

Related manuals for BiPAC 6300VNOZ

Brands by name

Popular brands