78
connection.
Ping
Click this button to ping the IP address that you entered.
Reset System
Click this button to reboot the BIPAC-5100/5100W. A warning dialog box is then
displayed asking you if you're sure you want to reboot the system. Click
OK
to
proceed.
Back
Click this button to go back to the main
Diagnostic
screen.
12.5.2 Diagnostic DSL Line Screen
Click Diagnostic and then DSL Line to open the screen shown next.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Reset ADSL Line
Click this button to reinitialize the ADSL line. The large text box above then displays
the progress and results of this operation, for example:
"Start to reset ADSL
Loading ADSL modem F/W...
Reset ADSL Line Successfully!"
ATM Status
Click this button to view ATM status.
ATM Loopback Test Click this button to start the ATM loopback test. Make sure you have configured at
least one PVC with proper VPIs/VCIs before you begin this test. The
BIPAC-5100/5100W sends an OAM F5 packet to the DSLAM/ATM switch and then