32
LABEL
DESCRIPTION
DHCP
If set to
Server
, your BIPAC-5100/5100W can assign IP addresses, an IP default
gateway and DNS servers to Windows 95, Windows NT and other systems that
support the DHCP client.
If set to
None
, the DHCP server will be disabled.
If set to
Relay
, the BIPAC-5100/5100W acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the clients. Enter the
IP address of the actual, remote DHCP server in the Remote DHCP Server field in
this case.
When DHCP is used, the following items need to be set:
LAN Subnet Mask
Enter a subnet mask in dotted decimal notation.
Client IP Pool
Starting Address
This field specifies the first of the contiguous addresses in the IP address pool.
Size of Client IP
Pool
This field specifies the size or count of the IP address pool.
Primary DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
Secondary DNS
Server
As above.
Remote DHCP
Server
If
Relay
is selected in the
DHCP
field above then enter the IP address of the actual
remote DHCP server here.
TCP/IP
IP Address
Enter the IP address of your BIPAC-5100/5100W in dotted decimal notation, for
example, 192.168.1.254 (factory default).
IP Subnet Mask
Type the subnet mask assigned to you by your ISP (if given).
RIP Direction
Select the RIP direction from
None
,
Both
,
In Only
and
Out Only
.
RIP Version
Select the RIP version from
RIP-1
,
RIP-2B
and
RIP-2M
.
Multicast
IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish
membership in a multicast group. The BIPAC-5100/5100W supports both IGMP
version 1 (
IGMP-v1
) and
IGMP-v2
. Select
None
to disable it.
Apply
Click this button to save these settings back to the BIPAC-5100/5100W.
Cancel
Click this button to reset the fields in this screen.
