Billion BiPAC 5100 User Manual Download Page 67

Page: 67 / 86

11.4 Using UPnP in Windows XP Example

This section shows you how to use the UPnP feature in Windows XP. You must already have

UPnP installed in Windows XP and UPnP activated on the BIPAC-5100/5100W.

Make sure the computer is connected to a LAN port of the BIPAC-5100/5100W. Turn on your

computer and the BIPAC-5100/5100W.

11.4.1 Auto-discover Your UPnP-enabled Network Device

Step 1.

Click start and Control Panel. Double-click Network Connections. An icon displays

under Internet Gateway.

Step 2.

Right-click the icon and select Properties.

Step 3.

In the Internet Connection Properties window, click Settings to see the port mappings

there were automatically created.

Step 4.

You may edit or delete the port mappings or click Add to manually add port mappings.

Summary of Contents for BiPAC 5100























































































Search results

Summary of Contents for BiPAC 5100

Reviews:

Related manuals for BiPAC 5100

Brands by name

Popular brands

Billion BiPAC 5100, User Manual

Search results

Summary of Contents for BiPAC 5100

Reviews:

Related manuals for BiPAC 5100

Brands by name

Popular brands