Configuring SSL VPN Parameters
77
Managing Network Extender IP address and client routes
Use the
Network Extender
menu item to assign client IP addresses to enable client access.
Modifying the Network Extender IP address range
Users who log on using Network Extender are assigned an IP address when they log on. You
can change the IP address range in the
Network Extender Client IP Address Assignment
screen.
FIGURE 90
N
ETWORK
E
XTENDER
C
LIENT
IP A
DDRESS
A
SSIGNMENT
SCREEN
Type the new IP address range parameters and click
Apply
.
Creating client routes
The
Client Route
item enables you to set routing rules for the Network Extender client connec-
tion. For example, if the client user’s internet packet's destination address is specified in Client
Route, the packet will be forwarded to the PPP connection passing through the BiGuard S10
through the SSL VPN tunnel.
1. Click
Client Route
to view the Client Routing Table.
2. Click
Create
to add a new client route to the table.
3. Type the destination address and destination netmask in the
Destination Address
and
Destination Netmask
fields. Click
Apply
to confirm the settings.