Billion BiGuard S10, Administration Manual, Page: 50 / 182

Configuring the BiGuard S10 39
Configuring WAN settings
This menu item enables you to configure WAN settings and also to set WAN outbound and
inbound bandwidth parameters.
C
ONFIGURING THE
WAN
You can select one of three protocols for the router’s WAN settings: PPPoE , Static IP , and
Obtain an IP Address Automatically .
PPPoE protocol. Select this item if your ISP uses the PPPoE (Point-to-Point Protocol Over
Ethernet) protocol.
FIGURE 34 WAN S
ETTINGS
PPP
O
E
SCREEN
Protocol Displays the current protocol. Click the drop-down arrow to change the
protocol.
Mode There are two modes for the connection: NAT (Network Address Transla-
tion) and Router.
NAT converts private IP addresses (such as in the 192.168.0.0 range) of
the machine on the internal private network to one or more public IP
addresses for the Internet. Select NAT to add an extra layer of security
when user on the internal network need to access the Internet. Select
Router for an internal network.
Username Type the user name that your ISP provided.
Password Type the password that your ISP provided.
Retype Confirm the password that your ISP provided.
Service Name Type the name of the ISP.