Basic Configuration with the Quick Start Menu
23
2. Click
WAN
. The
Quick Start WAN
screen appears.
3. Select
PPPoE
from the
Protocol
drop-down menu.
4. Type the user name in the
Username
field.
5. Type and confirm the password in the
Password
and
Retype Password
fields.
6. Select
Always On
or
Connect on Demand
from the
Connection
drop-down menu.
If you select
Connect on Demand
, the following
Idle Timeout
field is available.
7. Type the number (of minutes) in the
Idle Timeout
field. If your connection is
Connect on
Demand
, you are disconnected after the idle timeout period.
8. Check
Obtain DNS Automatically
if your ISP provides this with the assigned IP. Other-
wise, enter the Primary and Secondary DNS provided by your ISP.
9. Click
Apply
to confirm the settings.
Configuring the WAN for DHCP
Configure the WAN for DHCP to enable the BiGuard S10 to automatically assign IP addresses
to client stations.
Refer to the following to configure the connection:
1. Click
Quick Start
in the
Menu bar
.
2. Click
WAN
. The
Quick Start WAN
screen appears.
3. Select
Obtain an IP Address Automatically
from the
Protocol
drop-down menu.
4. Check
Obtain DNS Automatically
if your ISP provides this with the assigned IP. Other-
wise, enter the Primary and Secondary DNS provided by your ISP.
5. Click
Apply
to confirm the settings.