Monitoring Configuration Status
29
Changing the default LAN IP address
Click
IP Address
in the
Status
screen. The Ethernet screen lets you change default LAN IP
address settings.
FIGURE 22
E
THERNET
SCREEN
Click
Apply
to update the new settings.
DHCP server settings
Click
DHCP Server
in the
Status
screen. The DHCP Server screen shows the current settings.
FIGURE 23
DHCP
STATUS
SCREEN
The BiGuard S10 is enabled to act as a DHCP server for your network. Disable this function if
the stations that connect to the BiGuard S10 LAN ports use static IP addresses. To change
DHCP settings, see
Configuring DHCP server settings
on page
37
.
IP Address
Type the preferred IP address.
Subnet Mask
Type the preferred Subnet Mask.
RIP
Click the drop-down arrow to enable Routing Information Protocol (RIP).
The options are: RIPv1; RIPv2; RIPv1 + RIPv2; RIPv2 Multicast; and
RIPv1 + RIPv2 Multicast.