38
Administration Guide
FIGURE 33
DHCP S
ERVER
CONFIGURATION
SCREEN
Domain Name
Type the desired domain name. If you are using the BiGuard S10 to
replace another device and do not want to change the original networking
environment, type the domain name for the previous device.
Use Router as
DNS Server
When this checkbox is selected, the DNS address that you type in the
Primary DNS Server Address
field is assigned to stations on the LAN.
Primary DNS
Server Address
Type the primary DNS address that was provided by your ISP.
Secondary DNS
Server Address
Type the secondary DNS address that was provided by your ISP.
Default Lease
Time
Type the number of seconds (from 1 to 999999999) you want for the
default lease time. This is the time that the router can use an IP address
assigned by the DHCP server.
Maximum Lease
Time
Type the number of seconds (from 1 to 999999999) you want for the max-
imum lease time. This is the maximum time that the router can use an IP
address assigned by the DHCP server.
Range Start
Type the start IP address that the BiGuard S10 assigns to stations on the
LAN.
Range End
Type the end IP address that the BiGuard S10 assigns to stations on the
LAN.
Specify fixed MAC
Address Mapping
to fixed IP
Address
This option lets you map a MAC address to a specific IP address; once
mapped the router assigns the same IP address to that station every time
it logs on to the LAN. See
Mapping a MAC address to a fixed IP
address
on page
30
.