Configuring the BiGuard S10
41
Static IP protocol.
Select this item if your DSL provides you with a static IP address.
FIGURE 35
WAN S
ETTINGS
S
TATIC
IP
SCREEN
Protocol
Displays the current protocol. Click the drop-down arrow to change the
protocol.
Mode
There are two modes for the connection: NAT (Network Address Transla-
tion) and Router.
NAT converts private IP addresses (such as in the 192.168.0.0 range) of
the machine on the internal private network to one or more public IP
addresses for the Internet. Select NAT to add an extra layer of security
when user on the internal network need to access the Internet. Select
Router for an internal network.
IP Address
Type the IP address that your ISP provided.
Subnet Mask
Type the Subnet Mask that your ISP provided.
Gateway
Type the Gateway address that your ISP provided.
MAC Address
Select Specify a MAC Address (MAC Clone) if your ISP requires a defined
MAC address to access their service or to allow the BiGuard S10 to
accommodate the MAC filter from the ISP. Otherwise, click
Default MAC
Address
.
DNS
Type the Primary/Secondary DNS address that your ISP provided.
RIP
Select the RIP version from the drop-down menu. If you are not sure which
version to choose, select
Disable
.