15
7.4 Seat position
The horizontal posi-
tion of the seat can
and should be set too.
You will ride most
effectively if the front
knee if directly over
the pedal when the
cranks are positioned
horizontally.
To adjust the seat in the seat post, you have
to open the clamping screw at the back of the
seat post.
Now you are able to adjust the position of the
seat backwards and forwards.
The angle of the seat can also be set when the
clamps are opened.
After you have set the seat position
and angle, secure all fastening screws
with the correct torque. This will be
printed on the component itself or listed in this
operating manual (see chapter 33.3).
The upper surface of the seat should be horizontal.
90˚
Depending on the model, it may also be nec-
essary to loosen a screw at the front bottom
of the seat
The knee should be posi-
tioned above the pedal.
Summary of Contents for Flyer
