Biketec AG Flyer, Operating Manual

Page: 25 / 94

21
Please take note of the fol-
lowing information in order to
increase the life span of your
FLYER battery.
• Ensure that the battery is completely
charged before initial use and after
longer breaks between usage.
• If you have problems with the battery,
insert it into the charger. This resets
the battery, with the battery manage-
ment e.g. “waking” the battery from
sleep mode. After that, the battery
should work normally again. If this is
not the case, please contact your spe-
cialist retailer.
• The best temperature range to charge
the battery is b10°C and
30°C. At low loading temperatures,
the charging time is longer while the
battery does not charge at tempera-
tures over +30°C. The best thing to do
is charge and store the battery in the
house in the case of cold tempera-
tures outside or in a warm garage. In
this case, it is advisable to insert the
battery into your pedelec only shortly
before riding.
• If you are transporting your pedelec
by car, please remove the battery from
its holder and transport it separately.
Char
ging time
-10°C 0°C 10°C 20°C 30°C 40°C 50°C
Long charging times Optimal temperature range
for the charging process Battery could
be damaged
8.5 Checking the charge level
On the side of the battery (on the left hand side
when facing forward) there are five red LEDs
and a red button (“Push”)
If you briefly press on this red button
(“Push”), the LEDs light up. The number and
type of lights provide information on the charge
level of the battery.