Biketec AG Flyer Operating Manual Download Page 71

Page: 71 / 94

25.1 Luggage rack

Carefully read the operating

manual of your lighting system.

If there are any errors in the

functionality, you can simply replace the

bulbs in conventional headlights. To do

this, you have to have basic DIY skills!

You can purchase the correct bulbs at

your specialist retailer. Modern head-

lights are equipped with LED technology,

however this often means that the bulbs

cannot be replaced . In the case of a de-

fect, the entire lamp has to be replaced!

If you are riding with luggage,

ensure that you do not exceed

the maximum permissible

weight of the bicycle (you can get infor-

mation on this in chapter 33.1, “Techni-

cal information”). The permitted load

of the luggage rack is either printed on

the product itself or can be derived on-

line or from the specialist retailer.

Clean the reflectors and head-

lights of the lighting system at

regular intervals! Warm water

and washing up liquid suffice for this

job. Keep contact points clean and con-

ductive with a suitable maintenance oil!

Your FLYER is fitted with modern

lighting technology. In addition to the

conventional features, it also offers you

safety functions such as a standlight.

This means that if you are stationary

at night, e.g. at a traffic light, you are

still visible to other public road traf-

fic participants. Equally, some models

are equipped with the newly developed

daytime lights. These are supplied by

various energy sources depending on

the riding situation. For more on this,

please read the instructions supplied by

the component manufacturer.

Luggage load changes the behav-

iour of your pedelec. Not only is

the braking distance lengthened

with more weight, the steering is also less

responsive. You should therefore adjust

your riding style to the braking and steer-

ing behaviour of your FLYER, and always

anticipate a longer braking distance! Only

transport luggage on purpose-designed

luggage racks and do not exceed the max-

imum permitted load! Never attach a lug-

gage rack to the seat post, as the latter is

not designed for this purpose. This could

result in part failure and serious falls. You

invalidate your warranty from the manu-

facturer by fitting a luggage rack to a seat

post not intended for this purpose.

25. Additional parts

Summary of Contents for Flyer































































































Search results

Summary of Contents for Flyer

Reviews:

Related manuals for Flyer

Brands by name

Popular brands

Biketec AG Flyer, Operating Manual

Search results

Summary of Contents for Flyer

Reviews:

Related manuals for Flyer

Brands by name

Popular brands