66
Lighting systems
24.2 Dynamo
The dynamo generates the required electri-
cal energy for the front headlight and the rear
lights.
24.2.1 Hub dynamo
If your FLYER uses a hub dynamo, you can
switch this on and off easily on the rear side
of your front headlight with the on/off switch.
If the lighting system of your bike is equipped
with a light sensor, the dynamo will automati-
cally switch on or off.
To refit the light cable, the
connecting terminal of the
hub dynamo has to be fit-
ted on the right (facing
forwards). Re-attach the
connections correctly and
check that the lighting is
working properly. To do this,
turn the front wheel and
check if the light comes on.
24.3 Failure of the lighting system
In order to remove the front
wheel, you first have to remove
the connection of the light cable.
Connector cover
Remove
Connector cover
Connect
Cable
Front wheel fork
Front
wheel
fork
Mudguard stay
Spiral spring
Quick release nut
Connecting
terminal
The lighting system is a key part
and it is vital that it is proper
working condition! Only have
check-up and servicing work done by
authorised specialist retailers after fail-
ures or temporary problems!
Source: Shimano
®
techdocs
Summary of Contents for Flyer
