Bike-Lift TWIN-ARMS MTA 516 Page 6 Use And Maintenance Manual Download

Page: 6 / 39

Operating manual No.

057-2-6-0013-R0

Version 2021

Page 7

1.4

Manufacturer identification

Bike-Lift EUROPE s.r.l. via Don Milani, 40/42, 43012 Sanguinaro di Fontanellato (PARMA)
– Italy

Website:

www.bikelifteurope.it

E-mail:

[email protected]

Tel:

0039-0521-827091

Fax: 0039-0521-827064

1.5

Technical assistance and spare parts

To order spare parts, it is recommended to specify exactly the following data:



Model and serial number of the machine;



Code number and part name;



Required quantity;



Shipping means, address and telephone number; For

replacements use only genuine spare parts.

Do not wait until the components are completely worn before replacing them.

CAUTION: THE RECIPIENT WILL BE CHARGED FOR THE REPLACEMENT TOGETHER
WITH THE SHIPPING COSTS.

We recommend that you always contact Bike-Lift Europe s.r.l. for all those Assistance and
maintenance operations that are not described or indicated in this Manual.

Summary of Contents for TWIN-ARMS MTA 516








































Search results

Summary of Contents for TWIN-ARMS MTA 516

Reviews:

Related manuals for TWIN-ARMS MTA 516

Brands by name

Popular brands

Bike-Lift TWIN-ARMS MTA 516, Use And Maintenance Manual

Search results

Summary of Contents for TWIN-ARMS MTA 516

Reviews:

Related manuals for TWIN-ARMS MTA 516

Brands by name

Popular brands