Bike-Lift TWIN-ARMS MTA 516, Use And Maintenance Manual

Page: 16 / 39

Operating manual No. 057-2-6-0013-R0
Version 2018
Page 17
EN
During the use of the lifting platform it is very important to pay the utmost attention to the
ascent and descent maneuvers. During the ascent/descent phase the operator is required to
distance from the lifting platform according to the length allowed by the control panel cable.
The personnel who are not in charge of using the motorcycle lifting platform must not pass or
stand in the operating area of the machine.
The machine must always be operated by only one Operator.
Once the motorcycle is loaded on the lifting platform, position it in a vise, then
place the additional lifting component under the bike, lift the arms and fasten them
firmly to the bike.
GIVEN THE BEARING VALUE INDICATED ON THE PLATE:
Do not exceed the load capacity of the lifting
platform; Use it only to lift objects;
Do not modify the lifting platform;
The load must always remain firm and stable.
3.6 Pictograms
Danger of crushing hands with the lifting platform arms.
When the platform is at the desired height, insert the locking bar to prevent it
from falling down accidentally.
Load the motorcycle only when the platform and the additional lifting component
are completely lowered;
Before lifting it, make sure that nothing is supported by the ramp;
Do not lean the rear wheel of the motorcycle on the ramp during and after lifting.