Bike-Lift M516-001, Use And Maintenance Manual

Page: 20 / 50

Operating manual number
057-2-6-0001-R0
Page 20
Version 2021
EN
ALWAYS keep the mechanical lock hooked during work, in order to weigh down
the weight of the structure and of the vehicle standing on it even on the toothed
bars at the base.
During the use of the lifting platform it is very important to pay the utmost attention to the
ascent and descent manoeuvres. During the ascent/descent phase the operator is required to
distance from the lifting platform according to the length allowed by the control panel cable.
The personnel who are not in charge of using the lift must not pass or stand in the operating
area of the motorcycle lifting platform.
The machine must always be operated by only one operator.
Once the motorcycle is loaded on the lifting platform, place it in a vice or use the
rear kickstand, then fasten it firmly to the openings and the wheel lock by using a
belt.
GIVEN THE BEARING VALUE INDICATED ON THE PLATE:
Do not exceed the load capacity of the lifting platform;
Use it only to lift objects;
Do not modify the lifting platform;
The load must always remain firm and stable.
3.6 Pictograms
Danger of crushing hands with the lifting platform arms.
When the platform is at the desired height, insert the locking bar to prevent it
from falling down accidentally.
Load the motorcycle only when the platform is completely lowered.
Before lifting it, make sure that nothing is supported by the ramp.
Do not lean the rear wheel of the motorcycle on the ramp during and after
lifting.