Operating manual number
057-2-6-0001-R0
Page 18
Version 2021
EN
Finally, we remind you that the handling, installation, use, maintenance and putting out of
service of the machine represent a source of danger if these operations are not performed in
compliance with the requirements of this Manual or without the necessary caution and
attention required.
(Further and better details regarding the Risk Assessment to be requested from the
Manufacturer).
3.4
Operator protections
Before starting any type of work on the motorcycle lifting platform,
the operator must wear appropriate PPE, such as gloves and safety
footwear.
Always wear work clothing normally used in the mechanical workshop
activity.
3.5
Safety systems
The machine is equipped with a mechanical safety device (Figure 3) consisting of a mechanical
safety bar for standing at the working height, with the lower stroke limitation made by lock
blocks welded to the lower base.
Figure 3 – Mechanical stop system
mobile anchoring bar with automatic coupling which
prevents the accidental descent of the mobile surface.
mechanical safety system consisting of two toothed
bars firmly welded to the base
The lifting piston has a
parachute valve
which locks the cylinder in case the oil cable is
In order to make the machine safe during the ascent phase:
1-
Allow the anchoring bar to move freely around the perimeter of the toothed bar on the
base;
2-
When the selected position is reached, leave the bar uncoupled; this will act as a
mechanical stop in case of an uncontrolled fall of the structure.
In order to make the machine safe during the descent phase:
1-
Hook the anchoring bar to the appropriate lock in order not to hinder the correct descent
of the system;
2-
If the system is brought to the lower stroke (therefore in a position of minimum height),
the bar will automatically release to allow the ascent; otherwise, select the chosen
position to hook the bar which will act as a mechanical stop in case of an uncontrolled
fall of the structure.
Summary of Contents for M516-001
