21
Four expansion screws (M 10 x 10 mm) are needed to fix the Motorcycle Lift
to the surface through the holes previously used to fix the two wooden plates.
9.2 SET IN ACTION
To ensure proper Lift operation, follow the instructions herein contained.
9.3 INITIAL CLEANING
No specific initial cleaning is needed.
Be sure that loading and unloading areas are free from used motor oils and
dust.
Always wear waterproof gauntlets.
CAUTION: Be sure that no dirt, dust or bolts are inside the Lift.
Keep the sliding rails of the scissor and the safety bar rack free from any
object which might interfere with their normal operation.
Always keep the Technicians’ working area clean.
Refer to chapter CLEANING AND SERVICING to clean the Motorcycle Lift
properly.
9.4 PRE-OPERATION INSPECTION
Always make a pre-operation inspection.
Check the Motorcycle Lift to be sure that mechanic and electric installation
has been carried out properly
You may prevent an accident or equipment damage.
Summary of Contents for Cruiser 750
