Bike-Lift Cruiser 750, User Instruction Manual

Page: 40 / 56

40
13. INSTALLATION OF THE MOTORCYCLE LIFT
TECHNICAL SPECIFICATIONS OF THE ELECTRIC ENGINE:
Voltage: 220/230 volts; Frequency: 50 hz.; Power supply: 1kw
Voltage: 110/115 volts; Frequency: 60hz.; Power supply: 1 kw
POWER SUPPLY
a) Foot pump. Connect the hydraulic pipe to the nipple placed on the front
side of the pump.
b) Air pump. Connect the circuit of the compressed air to the lift.
c) Electric pump. Connect the electric cable to the electric system through
the plug (it does not come as standard equipment) according to the
local laws and regulations in force. The socket must be compulsorily
provided with grounding.
HYDRAULIC CIRCUIT CLEANING
a) Raise the motorcycle lift up to the maximum position of the mechanical
safety through the ascent pedal.
b) Disconnect the safety bar, then push the descent pedal to lower the lift.
c) Repeat this procedure several times to eliminate any possible air bind
which might be present in the hydraulic circuit.
d) After this procedure has been carried out, the lift will work properly. If it
fails to do so, repeat the procedure again.