U
SER
’
S
AND
I
NSTALLER
’
S
M
ANUAL
M
AINTENANCE
Version: 4.0 (23-08-2007)
43
2. Remove the grille from the inlet grate:
-
Slide the grille upward.
-
Tilt the grille a little up.
-
Remove the grille from the grate.
3. Clean or replace the filter.
4. Reset the filter service life using function no. 2 at the
manager’s level (if tracking is enabled, see section
5.1.2
).
Note:
n
When putting the grille back:
Ensure you put it back correctly into the inlet grate.
Recessed and cassette models
1. Open the inlet grille:
-
Push the two pins
1
towards one another – the grille
will tilt down.
2. Slide the filter out of the grille.
3. Clean or replace the filter.
4. Reset the filter service life using function no. 2 at the
manager’s level (if tracking is enabled, see section
5.1.2
).
correct
wrong
1
1