S
ETTINGS
C
OMFORT
A
IR
C
URTAIN
40
4.5.4 Unit input settings and options
4.5.5 Particulars of the outputs
Options and operation
The working of the outputs depends on the setting of func-
tion no. 61 at the installer’s level. The options are listed in the
table in section
4.5.6
.
The functions of the two outputs cannot be set individually.
O
PTIONS
F
UNCTION
NO
. 60
W
ORKING
OF
THE
INPUT
NORMALLY
OPEN
NORMALLY
CLOSED
EFFECT
ON
INCOMING
SIGNAL
EFFECT
ON
RELEASED
SIGNAL
1
(default
value)
51
The air curtain is or continues to
be switched Off.
This works only in units to which
the input signal is directly
connected (
locally
).
The unit operates according to the
control panel settings.
The release delay (function no. 76)
does not work.
2
52
The air curtain operates 1 strength
up, if switched on.
The display reads
.
The unit operates according to the
control panel settings.
3
53
The air curtain operates 2
strengths up, if switched on.
The display reads
.
The unit operates according to the
control panel settings.
4
-
The discharge air temperature is
increased by 5 ºC.
The display reads
.
The unit operates according to the
control panel settings.
5
-
The heating is reduced to the half
temperature.
The display reads
.
The unit operates according to the
control panel settings.
6
-
The heating is switched off.
The display reads
.
The unit operates according to the
control panel settings.
-
71
The air curtain is or continues to
be switched On. You can switch it
Off using the
key.
The air curtain is or continues to
be switched Off. You can switch it
On using the
key.
Function no. 52 must be set at value 0 (default value).
•
Normally open
: The signal comes in when the contact is closed.
•
Normally closed
: The signal comes in when the contact is broken.