S
ETTINGS
C
OMFORT
A
IR
C
URTAIN
36
4.3.3 Functions at the installer’s level
N
O
.
F
UNCTION
O
PTIONS
Y
OUR
SETTING
51
Working of the room temperature
control
See also section
4.4
.
0 = no control
1 = control is based on air inlet
temperature (default value)
2 = control is based on temperature
reading of control panel
52
Working of the external-control input
in the control panel
See section
4.5.3
.
58
Installation level
This function has a fixed value for the
types CA S.
0 = level A for favourable conditions
(lower discharge air velocity and sound
level)
1 = level B for normal conditions
(default value)
60
Working of the external-control input
in the unit
See section
4.5.4
.
61
Working of the external-control out-
puts in the unit
See section
4.5.6
.
62
No function
X
63
No function
X
64
No function
X
65
PID factors for temperature control
using the unit
Do not change these settings, unless on Biddle’s
instructions.
66
67
69
Room temperature reading in the
display
See also section
4.4
.
0 = no reading
1 = reading (default value)
70
Version of the control panel software
The version number is displayed.
(no options)
71
Resetting control panel
Use this function:
• to remedy fault E1 or E2 (see
section
6.4
);
• after replacing a printed circuit
board (see section
7.7
);
• after removing or replacing a
connected unit.
dF = all functions have default values
-- = there are functions with deviating
values
To reset:
• press
and
simultaneously.
You return to the user’s level immediately.
This will default all values at the installer’s
level.
Note down your settings before-
hand.
X
72
Enable/disable reporting of Over-
heating or Underheating fault
0 = do not report faults F2 and F3
1 = report faults F2 and F3 (default value)