2.4 Supported phones
15
The back plate will also have named cutouts for all the connectors that the motherboard
provides. From left to right, the connectors are:
•
C
ONSOLE
- COM port used as a serial connection to the appliance, just in case a
certified technician needs to debug it (for simplicity reasons, appliance does not have
any monitor connectors such as VGA, DVI or HDMI),
•
LAN - Standard ethernet port which is used as the main communication port for the
appliance.
•
MAN - Managed Area Network, ethernet port used for the manual connection to the
appliance which is needed to discover or setup the network details for the LAN port
(See Section 4.3).
•
RAN - Replication Area Network, dedicated ethernet port used for network replication
to a second appliance for backup purposes.
•
USB - two USB 3.0 ports for various needs.
•
P
OWER JACK
- 12VDC power connector.
2.4
Supported phones
Depending on the edition of the appliance, number of supported phones will vary. If the
appliance is a business edition appliance, it will support all the models that are officialy
supported by PBXware. Please check out our wiki
page for a complete list.
1
http://wiki.bicomsystems.com/UADs
