background image

11

SECTION 3

TREADMILL AND CONSOLE

MOVING THE TREADMILL

Use the front wheels to move the treadmill. Elevating the treadmill
(incline) may help make the wheeling of the unit easier. Always be
sure to use proper lifting form / technique. Grasp the end caps with
two hands and slowly lift deck up until you are in an upright position.
Keep the treadmill at that angle and wheel the unit as required.

SAFETY KEY & CLIP

BH Fitness treadmill is equipped with a safety key that will disable

the treadmill if it is not in place. User should attach the clip end to

clothing. The magnet end goes into the recess in the center of
the console. If at any time you need to stop the treadmill, pull the
safety key quickly off the console. This will cut all power to the
treadmill and it will come to a complete stop. To restart the treadmill,
place the safety key back in place. Previously input program and data
will have to be re-entered.

BEFORE STARTING

Straddle the running belt and stand on the side rails. Insert the safety
key and attach the clip to your clothing. Do not stand on the walking
belt while starting or stopping the treadmill.

BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610

www.

BHFitnessUSA

.com • Phone 949-206-0330 • Fax 949-206-0013

TS5

Summary of Contents for TS5 -
































Reviews: