9
TTENTION: The assistance of a
nt of the unit. Insert the screws
ble feet (29), and line up the dots.
sert the screws (58), fit the washers
PORTANT: It is advisable to
e
d remove the
bring the main post (11) up to boss
(13), the washers (14)
nd the spring washers (16) that you
TTENTION: It is advisable to
tighten these screws after one
onth of using the machine.
) and go
116
. ATTACHING THE FOCUS BAR
A
second person is required for this
stage of the assembly.
2. ATTACHING THE STABILIZER
BARS.
First, lift the front of the machine and rest
it on a prop, such as the packaging that
you have just removed. Bring the front
stabilizer bar with wheels (62) to the
main body (5) positioning the wheels at
the fro
(58), fit the flat washers (59) and self
locking nuts (55), and tighten securely.
Fig 3.
Carry out the same operation to attach
the rear stabilizer bar. Lift the rear of the
machine slightly and rest it on a prop,
such as the packaging that you have just
removed. Take the rear stabilizer with
adjusta
In
(59) and nuts (55), and tighten securely.
Fig 3.
IM
retighten these screws after on
month of using the machine.
3. ATTACHING THE MAIN POST
Take the main post (11) an
screws (13) the corrugated washers (14)
and spring washers (16) from the bottom
of the post. Fig.4.
Next,
(D) on the main body, Fig. 4, connect the
terminals (106 with 18) and (108 with
20).
Slip the main post (11) over the boss (D)
on the main body, Fig 4, making sure not
to snag any of the cables.
Refit the screws
a
removed previously, and tighten
securely. Fig. 4
A
re
m
4. ATTACHING THE FOCUS BARS
AND WATER BOTTLE HOLDER
Insert the focus bar spindle (26) through
the spacer bushes on the main post (11),
leaving it centered. Fig. 5
Fit the spacer washers (52) as shown in
Fig. 5. Insert the left focus bar (21)
(marked with the letter “L”) onto the focus
bar spindle (26), then fit the right focus
bar (marked with the letter “R”) on the
other end of the spindle. Fit the bolts (53)
and the flat washers (54) and with the
help of the box spanners (A) tighten
securely.
Attach the water bottle holder (120) to
the main post (11) with screws (142).
Insert water bottle (143) in holder. Fig 5.
5. ATTACHING THE FOOT BARS
Take the left foot bar (32) and position it
on the “U” at the bottom of the left focus
bar (21). Fig. 6. Insert screw (57), as
shown in Fig. 6A, then fit the flat washer
(56) and the self locking nut (55), and
tighten securely.
Take the right foot bar (33
through the same assembly procedure
as with the left.
6. ATTACHING THE FOOTRESTS
Position the left footrest 115 (marked
with the letter “L”) on top of the unit’s left
foot, Fig 6B, (left and right refers to the
user’s position doing exercise) fit screws
(e) and tighten.
Next, position the right footrest
(marked with the letter “R”) on top of the
right foot and secure using screws.
7
SPINDLE COVERS
ATTACHING THE CENTRAL COVERS
Take the front (122) and rear (123)
covers and position them on the main
post (11). Fig. 7.
Now use the screws (27) and (60) to
attach them to the post.
8. ATTACHING THE FOCUS BAR
SIDE COVERS
Take the covers (124 and 125), marked
on the inside with the letter “R”, and
Summary of Contents for IRIDIUM AVANT
