background image

 

18

power transmission lines or other such 
devices that generate powerful magnetic 
fields located in the area of equipment 
usage. If one of your associates has a 
Polar heart rate monitor, if possible, 
borrow it for a while to check if that unit 
works properly in the area of exercise 
equipment. If it does not and it works 
outside or another area of the house, the 
location is very difficult for wireless heart 
rate measurement and the equipment 
should be moved to another location. 
g) Receiver has broken down for some 
reason. 

Question 3:

 

Irregular heart rate reading  

Answer 3: 

a) The most common reason for irregular 
readings especially at the beginning of 
exercise session is that there is no 
proper connection between skin and the 
electrodes of transmitter. To ensure a 
proper connection, electrodes should be 
wetted prior to exercising. 

b) Elastic strap is too loose allowing 
transmitter to move during exercise. 
c) Ensure that there is no anyone else 
wearing a transmitter in the reception 
area of your receiver. If there are other 
transmissions close to you crosstalk may 
appear, unless you are using the coded 
Products Polar products. 
d) Pacemaker and other implanted 
devices may change the electrical 
characteristics and operation of heart so 
that transmitter detects several beats 
instead of one beat. 
e) Some people have a reversed ECG 
signal compared to normal a ECG signal 
possibly causing a transmitter to send 
two pulses for each heart beat. Please 
turn transmitter upside-down. 
f) Interferences. Electrical equipment 
such as monitors, motors, LED displays, 
transformers switches, cellular phones 
etc. generate electromagnetic noise 
which may cause missing or extra pulses 
resulting in incorrect heart rate reading.

Summary of Contents for IRIDIUM AVANT






















Reviews: