SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5
6
e
s
s
a
r
t
S
r
e
s
u
k
r
e
v
e
L
ax +49 (0) 2191 / 46438-40
e
d
.
l
h
a
t
s
w
s
@
o
f
n
i
:
l
i
a
M
-
E
d
i
e
h
c
s
m
e
R
7
9
8
2
4
-
D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Fig.1.4
4.
Coat core drill with oil (fig.1.4)
5.
Insert it into the guide bushing.
6.
Insert adapter with 3/8” hex socket wrench
insert 10mm into a suitable power drill.
Fig.1.5
7.
Using this. Start the drill-out process,
applying only light pressure to core drill
(Fig.1.5) and interrupting the process
serveral times to remove swarf. The correct
drilling depth is reached when the stop
shoulder of the core drill contacts the drilling
busing.
Note:
The correct drill speed (app.500 rev/min)
Apply oil to the cutting edges of the core drill.
