BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 70150
Twister Cleaning Gun with Extractor Attachment
INTENDED USE
This compressed air device with rotating cleaning agent nozzle serves to clean surfaces and locations
difficult to access. Due to the suction attachment, the cleaning gun becomes a high-performance
helper when cleaning car carpets and seat covers. The suction attachment is mounted on the
cleaning gun and connected to a wet or dry vacuum cleaner.
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third-parties.
SAFETY NOTES
When using pneumatic tools, fundamental precautionary measures must always be ensured in order
to reduce the risk of personal injury and property damage.
•
Keep children and unauthorised persons away from the work area.
•
Do not let any children play with the tool or its packaging.
•
Make sure that the work area is sufficiently illuminated.
•
Keep the work area clean, organised, dry and free from other materials.
•
Do allow untrained persons work with this tool set.
•
Ensure that the trigger is located in the OFF position when being connected to the compressed
air system.
•
Do not carry out any modifications on the tool.
•
Use only accessories that are dimensioned for use with compressed air tools, e.g. with impact
wrenches, for manual use do not use conventional sockets, use only power sockets.
•
Disconnect the tool from the compressed air supply before installing accessories, when carrying
out maintenance work or the device is not being used.
•
Maintain the tool with care. Check hoses and compressed air connections at regular intervals.
•
Do not use the tool if it is damaged. Have the tool repaired by specialist personnel.
•
When installing regulators, filters and other accessories, observe the manufacturer
specifications of the compressed air system.
•
Store the tool in a dry and safe location out of the reach of children.
TECHNICAL DATA
Nozzle speed: 4,000 rpm
Working pressure: constant 5.5 to 6.2 bar
Maximum pressure: 6.2 bar (90 psi)
Air consumption: 254 l/min
Compressed air inlet: 1/4"
Sound pressure level (LpA): 89.4 dB (A)
Sound power level (LwA): 99.3 dB (A)
Vibration level (ahd): 1.44 m/s²
Vibration level (K): 0.64 m/s²