7
3. Installation
3.1 Battery
This device has built-in lithium battery.
1. Plug in power adapter
2. Connect power adapter to the device
3. Device will show a black screen with a battery icon and moving bars
4. When the device is fully charged, the screen will display battery icon with full bars
Warning:
Do not use device on patient while charging
3.2 Lip hook and file clip
The measuring wire has a plug at one end and two jacks on the other end.
•
Plug in the measuring wire to the device
•
Plug in the lip hook to the white jack
• Plug in the file clip to the gray jack
Note:
When the device is connected to an endo motor, the file clip is not needed.
To remove lip hook or file clip, hold the jack and pull apart. Do not pull the wires.