
6
2. Warnings and Precautions
Warnings
•
First read this instruction manual before beginning to operate this device
• This device should only be operated by qualified and licensed dental professionals
•
Do not directly or indirectly place this device near heat source.
•
Operate and store this device in reliable environment.
•
This device requires special precautions regarding electromagnetic compatibility (EMC) and
must be in strict accordance with the EMC information for installation and use. Do not use this
equipment especially in the vicinity of fluorescent lamps, radio transmitting devices, remote
control devices, handheld and mobile high- frequency communication devices.
•
Do not make any changes to the device. Any changes may violate safety regulations, causing
harm to the patient
•
Use original power adapter for charging the device
•
Do not charge and operate the device at the same time. The device should be operated with
battery only. Detach adapter from the device for operation.
•
Remove battery from device for long term storage
•
The device cannot be autoclaved. Use disinfectant of neutral pH value or ethyl alcohol to wipe
its surface.
•
Follow instruction in this manual to replace battery and only replace with original lithium battery.
Precautions
• Avoid any contact of the file or lip clip with metals. Be particularly careful with patients fitted
• with metallic crowns, bridges or large metallic fillings. Contact with metal can impair the
measurements.
•
High concentrations of sodium hypochlorite may result in a lower accuracy of the
measurements. It is recommended to use sodium hypochlorite solution at maximum 3%
concentration.
•
Make sure that the canal is wet enough to ensure reliability of the measurement. But avoid
excessive liquids inside the tooth cavity to prevent overflow and incorrect measurements.
•
Apex locator may not be able to provide correct measurements in all conditions. In any case, it
is recommended to take an X-Ray prior to device use and to compare the results obtained by
both methods.