Beurer BC 87, Instructions For Use Manual

Page: 35 / 238

35
Average values
Press the M1 memory button.
• is shown in the display.
• The average value of all saved measured
values in this user memory is displayed.
Press the M1 memory button.
• is shown in the display.
• The average value of the morning meas-
urements for the last 7 days is displayed
(morning: 5 a.m. – 9 a.m.).
Press the M1 memory button.
• is shown in the display.
• The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6 p.m. – 8 p.m.).
Individual measured values
• When you press the memory button M1
again, the last individual measurement is
displayed (in this example, measurement
03).
• When you press the memory button M1
again, you can view your individual measurements.
• To switch the device off again, press the START/STOP
button .
Deleting measured values
• In order to delete a user memory, first select the user
memory to be deleted by pressing the M1 or M2 memory
button when the device is switched off and confirming
your selection by pressing the START/STOP button .
• The average value of all measurements for the selected
user memory appears on the display; at the same time
lights up on the display.
• Now press and hold the memory buttons M1 and M2 at
the same time for 5 seconds.
appears on the display.
All the values in the selected user memory
have now been deleted.
You can exit the menu at any time by
pressing the START/STOP button .
8. CLEANING AND MAINTENANCE
• Clean the device and cuff carefully using a slightly damp
cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff under
water, as this can cause liquid to enter and damage the
device and cuff.
• If you store the device and cuff, do not place heavy ob-
jects on the device and cuff. Remove the batteries.
SY
S
mmHg
DIA
mmHg
PUL
/min
SY
S
mmHg
DIA
mmHg
PUL
/min
SY
S
mmHg
DIA
mmHg
PUL
/min
SY
S mmH
g
DIA
mmH
g
PUL
/min