Beurer BC 87, Instructions For Use Manual

Page: 27 / 238

27
Information on the display:
The corresponding drawings are shown on page 3.
1
Time and date
7
Calculated pulse rate
2 Battery indicator 8
Symbol for irregular
heartbeat
Symbol for pulse
3
Symbol for Bluetooth ®
transfer
4
Resting indicator display
1
2
1
2
9
Risk indicator
10
Diastolic pressure
5 User memory / 11
Systolic pressure
6
Number of memory spaces / memory display for aver-
age value ( ), morning ( ), evening ( )
6. INITIAL USE
Inserting the batteries
• Remove the battery compartment lid on the left side of
the device
A
.
• Insert two 1.5 V AAA micro (alkaline type LR03) batteries.
Make sure that the batteries are inserted the correct way
round in accordance with the markings
A
. Do not use
rechargeable batteries.
• Close the battery compartment lid again carefully.
• flashes on the display. Now set the date and time as
described below.
If the battery change symbol is flashing and
appears, no further measurements are possible and you must
replace all batteries. Once the batteries have been removed
from the device, the date and time must be set again. Any
saved measured values are retained.
Adjusting the settings
You must make sure that the device has the correct settings
before use in order to be able to make full use of all functions.
Only by doing so can your measurements with associated
date and time be saved and accessed later by you.
There are two different ways to access the menu from
which you can adjust the settings:
• Before initial use and after each time you replace the
battery:
When inserting batteries into the device, you will be taken
to the relevant menu automatically.
• If the batteries have already been inserted:
With the device switched off press and hold the START/
STOP button for approx. 5 seconds.
In this menu you can adjust the following settings in succes-
sion:
Hour
format
Date Time User