Beurer BC 87, Instructions For Use Manual

Page: 31 / 238

31
• If the Bluetooth ® function has been activated, the data
transfer to the “beurer HealthManager Pro” app starts
automatically after the measurement.
• The Bluetooth ® symbol flashes on the display. The device
now attempts to connect to the app for approx. 30 sec-
onds.
• The Bluetooth ® symbol stops flashing as soon as a con-
nection is established. All measurement data is trans-
ferred to the apps. Once the data transfer is successfully
complete, the device switches off automatically.
• If a connection to the smartphone cannot be established
after 30 seconds, the Bluetooth ® symbol goes out and
the device switches off automatically after 1 minute.
• If you forget to turn off the device, it will switch off au-
tomatically after approx. 1 minute. In this case too, the
value is stored in the selected or most recently used user
memory.
Transfer of measurements via Bluetooth ®
In addition to displaying and saving your measurements lo-
cally on the device, you have the option of transferring your
measurements to your smartphone using Bluetooth ® low en-
ergy technology.
For this, you will need the “beurer HealthManager Pro” app.
These apps are available for free in the Apple App Store and
from Google Play.
System requirements: List of compatible
devices:
- iOS ≥ 12.0 / Android™ ≥ 8.0
- Bluetooth ® ≥ 4.0
To transfer the measured values, proceed as follows:
Step 1: BC 87
Activate the Bluetooth ® function on your device
as described in the “Adjusting the settings”
section.
Step 2: “beurer HealthManager Pro” app
In the “beurer HealthManager Pro” app, add the
BC 87 under Settings / Devices and follow the
instructions.
Step 3: BC 87
Take a measurement.