Better Light ViewFinder 7 User Manual Download Page 97 | Manualshive

Page: 97 / 99

background image

97

Appendix G

Error Messages

(not to be confused with Macintosh OS error message numbers)
Camera Errors
“Camera reported error: Busy”

The camera is busy doing something that prevents the requested action. This message is usually

encountered after exiting from a scan to the camera’s disk drive and subsequently attempting another
scan, or attempting to access the camera’s disk drive (from the File Manager) before the scan in prog-
ress is completed. If so, simply waiting until the scan in progress is complete should eliminate this
message. This message may also occur if the camera ﬁrmware fails to complete a scan for some other
reason, probably requiring a camera restart to ﬁx.

“Camera reported error: Not Ready”

The camera is not ready to perform the requested action. This message may be encountered if the

camera’s internal disk drive does not initialize properly during camera startup. Subsequent attempts to
perform any operation requiring this disk drive will return a “not ready” error. The condition might
be corrected by quitting the camera software, restarting the camera, and waiting until the camera is
ready before launching the camera software.

“Camera reported error: No Room”

This error message is returned when the camera’s internal disk drive does not contain a single

“available” space large enough to hold the desired scan. The camera will not split an image across mul-
tiple smaller sections, which can lead to disk fragmentation. This error may be eliminated by deleting
enough image ﬁles from the camera disk to create a single space large enough for the desired scan.
Note that adjacent “available” spaces are immediately combined into a single larger space within the
camera, but the File Manager list will continue to show these as separate spaces until the File Manager
is exited and re-entered.

“Camera reported error: Conversion Error”

The camera controller returns this error when an incoming parameter value cannot be success-

fully converted to a number, possibly due to a corrupted data transfer. This message should never be
encountered in normal operation.

«
...
95
96
97
98
99
»

Summary of Contents for ViewFinder 7




































































































Reviews:

No comments

Related manuals for ViewFinder 7

Brand: Halcro Pages: 12

Brand: Adobe Pages: 122

SimNow Simulator 4.4.5

Brand: AMD Pages: 269

Brand: AMX Pages: 16

Brand: FARONICS Pages: 42

Scarbee Clavinet & Piano

Brand: Native Instruments Pages: 24

Brand: GRASS VALLEY Pages: 4

Interactive UNIX

Brand: ICP Pages: 6

Brand: Lucid Pages: 10

FM2A85X Extreme4

Brand: Lucid Pages: 12

Brand: DAVIS Pages: 49

Brand: Euphonix Pages: 2

Brand: Waves Pages: 16

ML 2851ND - B/W Laser Printer

Brand: Samsung Pages: 30

Brand: Lenovo Pages: 2

Brand: Lenovo Pages: 178

Brand: Lenovo Pages: 174

FLASH MX PROFESSIONAL 2004 - FLASH LITE 1.1...

Brand: MACROMEDIA Pages: 86

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands